Rheem Electric Booster with 3 Year Limited Warranty
SKU: 410890
- Product Type Electric Tanked Water Heater
- Width 21.5" Height 23" Depth 21.75"
- View Complete Specs
- Finish Porcelain Enamel
Questions About Rheem 410890?
Winthrop Supply has professionals available to assist you with your selection from Rheem.
Email an Expert
More Like This
Product Details
Rheem 410890
E10-9-G
Electric boosters are designed to fit under counters and deliver sanitizing rinse water for all stationary rack and conveyor type commercial dishwashers. Our 10 gal electric booster will raise preheated or cold water to 180 deg F rinse temperature for compliance with UL sanitation (NSF5) and all federal, state, county and local health department sanitation codes. In addition, these models can be used as circulating tank commercial electric water heaters for gravity or pump circulation to an auxiliary storage tank.
- Finish Porcelain Enamel
- UPC 020352410890
- Online Product ID 5602199
- Width 21.5"
- Height 23"
- Depth 21.75"
- Oversized yes
- Material Steel
- Voltage 480v
- Warranty 3 years Limited
- Sink Length 29.25"
- Capacity (gal.) 10
- Fuel Type Electric
- Application Commercial
- Asme yes
- Cold Water Inlet Size 1.25''
- Current Rating 11 A
- Element Wattage 3000 W
- Heating Capacity 30710 Btu/hr
- Height To Cold Side Connection 5.75''
- Hot Water Outlet Size 1.25''
- Input Wattage 9 kW
- Maximum Working Pressure 150 psi
- Number Of Elements 3
- Number Of Phase 3
- Recovery Rate At 100 Deg F 37 gph
- Safetylist CSA Certified, UL Listed, UL 1453, NSF 5, CO2 Reduction
- Special Features Class G Fuse
- Thermostat Type Immersion
- Shipping x W:24.10"x H:19.40" 99.00 lbs.
Additional information
- System sentinel - all electric booster models employ an element diagnostic panel, utilizing light emitting diodes (LED), corresponding to the number and location of each heating element. LED''s are energized when the electric elements are operating. An unlit LED pinpoints the exact location of a non-functioning element, making element operation diagnosis simple and positive
- Long life tank design: proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion-resistance resulting in a superior tank design
- Long life heating elements - separate screw-in type elements feature a Nichrome wire filament, embedded in magnesium oxide sealed in a copper tube to resist water chemical corrosion, for long element life and a long life performance, elements are directly immersed in the water for maximum recovery efficiency (98 percent) and are easily changed by simply screwing new ones into the tank
- Integral fusing - all models have integral fusing for each element
- Anode rods - (2) magnesium anodes are installed in each tank for maximum corrosion-resistance
- AGA/ASME rated T and P valve - factory installed relief valve
- Electrical connections - pre-wired, accessible control box with multiple knock-outs on side in size selections to match the National Electric Code, sizes range from 1/2''-2'', a grounding screw is provided for attaching an equipment grounding conductor
- Single panel control box - it comes with hinged stainless steel door that provides immediate access to all electrical components and elements
- Terminal block - all models are equipped with UL listed terminal blocks for simplicity of installation, the terminal block will accept either copper or aluminum field connect wire
- All units are furnished with a fused 120 V control circuit, all controls (thermostats, high temperature limit, etc.) are operated off of this basic 120 V control circuit, this circuit is created by an internal multi-tap transformer of unique design that has (4) taps for the primary voltages, 208, 240, 277 and 480
Resources
Online Tools
Downloads
About This Brand
Rheem
Winthrop Supply is proud to present this Porcelain Enamel Electric Tanked Water Heater, by Rheem. The 410890 is made from premium materials, this Electric Tanked Water Heater offers great function and value for your home. This fixture is part of Rheem's Collection, so make sure to check out other fixtures to accessorize your room.
Respected For Reliability, Rheem is an industry leader for total heating, cooling and water heating solutions. In fact, Rheem is one of the few global brands with product offerings covering residential and commercial heating, cooling, conventional and hybrid storage-style water heaters, tankless water heaters, solar water heating systems, hydronic and geothermal systems, indoor air quality accessories, and replacement parts for all categories - making Rheem a one-stop Air and Water comfort solutions provider. All Rheem products meet or exceed rigorous industry and regulatory standards for quality, reliability, efficiency, and air & water quality. From design and fabrication to finished product assembly, each phase in the manufacturing process is rigorously monitored and measured to ensure the highest quality , durability and operating excellence. Rheem products are routinely tested and certified by various government and third-party testing labs to ensure quality standards.